LAHORE, November 15, 2026: Motorists in Pakistan may not need to change their car’s engine oil grade simply because winter has arrived, as the correct oil viscosity depends on the vehicle manufacturer’s specifications rather than seasonal temperature changes alone.
With colder mornings approaching, some mechanics recommend switching from thicker oils such as 20W-50 to lighter grades like 10W-30 or 5W-30. However, automotive maintenance guidance indicates that such changes are not always necessary and could be unsuitable for certain engines.
The most important consideration is whether the existing engine oil meets the manufacturer’s recommended viscosity and performance standards for local weather conditions.
Does Cold Weather Require Thinner Engine Oil?
Engine oils are classified using grades such as 0W-20, 5W-30, 10W-40 and 20W-50.
The letter “W” stands for winter, while the number preceding it indicates the oil’s low-temperature viscosity classification. The second number represents its viscosity classification at higher operating temperatures.
For example, 5W-30 and 10W-30 have the same high-temperature viscosity grade but different low-temperature characteristics.
According to historical climate data from the World Meteorological Organization, Lahore’s average minimum temperature falls to 8.6°C in December and 7.4°C in January.
These conditions do not automatically require motorists to change oil grades if their current oil already meets the manufacturer’s specifications.
Can Thinner Oil Improve Fuel Economy?
Some manufacturers recommend lower-viscosity engine oils to improve fuel efficiency and cold-start performance.
However, switching from 20W-50 to 5W-30 does not guarantee better mileage for every vehicle.
The appropriate choice depends on engine design, model year, manufacturer recommendations and operating conditions.
Similarly, vehicles with higher mileage do not necessarily require thicker oil unless there is a specific technical reason.
What Should Car Owners Check Before Changing Oil?
Motorists are advised to examine their vehicle’s owner’s manual before selecting an engine oil grade.
Important checks include:
Manufacturer recommendations: Confirm the approved viscosity grade for the specific engine.
Oil quality standards: Check API, ILSAC, ACEA or manufacturer-specific performance requirements.
Engine condition: Investigate excessive oil consumption, unusual noises or smoke rather than automatically switching to thicker oil.
Product authenticity: Purchase genuine engine oil from reliable suppliers.
Correct oil quantity: Ensure the workshop uses the recommended quantity and compatible oil filter.
Experts also caution that difficulty starting a car on cold mornings does not necessarily indicate an engine oil problem.
Weak batteries, starter motor issues and other mechanical faults can produce similar symptoms.
If the oil-pressure warning light remains illuminated after starting, motorists should switch off the engine and arrange an inspection to prevent potential damage.
Should Drivers Switch From 20W-50 to 10W-30?
A seasonal switch should only be considered after checking the manufacturer’s approved grades and the vehicle’s condition.
If the existing oil meets the recommended specifications for expected temperatures, there may be no reason to replace it with a different viscosity simply because winter has begun.
However, drivers using an unsuitable oil grade should seek qualified technical advice rather than continuing with it solely because the vehicle appears to operate normally.
The key recommendation is to follow the specifications for the particular engine instead of relying on general workshop advice or recommendations intended for different vehicle models.

